THE BUYER'S GUIDE / SELECTION
A buyer-focused guide to selecting Industrial Grade Ground Calcium Carbonate GCC from Shijiazhuang Fengersheng Mining Co., Ltd. It covers what to define before requesting a quote: application, mesh size, purity and whiteness, moisture, thermal limits and processing behaviour. It uses the published product parameters, points out where those figures need confirmation, and explains when this grade may not fit.
Application fit: rubber, plastics, paints, water-based coatings, papermaking, concrete and fireproof ceiling materials are the published uses
Mesh size: published range of 100 to 5000 mesh, with customisation within that range
Purity and optical properties: published calcium content of 98.6% and whiteness of 94.2%, to be confirmed for each lot
Moisture and pH: published moisture of 0.18% and pH of 9.4, checked against formulation tolerance
Thermal limit: described as stable below 400℃
Processing behaviour: claimed dispersibility and low oil absorption, to be checked in buyer trials
Documentation and commercial terms: specification sheet or COA, pricing, packaging, lead time and certifications to be requested separately
Industrial Grade Ground Calcium Carbonate GCC is a mineral filler. Buyers choose it by matching particle size, purity and processing behaviour to a specific formulation. It is not a commodity you can buy on name alone. This guide explains how to work through that decision using the published information for the Industrial Grade Ground Calcium Carbonate GCC supplied by Shijiazhuang Fengersheng Mining Co., Ltd. It also lists the points you should confirm before ordering.
According to the product page, this GCC is made from natural carbonate minerals: calcite, marble and limestone. It is described as a functional filler for:
Write down your end use before you compare offers. A filler for a plastic compound and a filler for a water-based coating have different priorities. These include particle size, dispersion, whiteness and moisture tolerance.
Note on food use: The product is industrial grade. Do not choose this grade for food, pharmaceutical or other regulated contact uses.
The published mesh range is 100 to 5000 mesh. The supplier says it can customise mesh size within this range for specific industrial requirements. When you make an enquiry:
The product page lists these parameters:
| Parameter | Published value |
|---|---|
| Calcium content | 98.6% |
| Sieve residue | 0.005% |
| pH value | 9.4 |
| Whiteness | 94.2% |
| Moisture content | 0.18% |
| Clinching point (d100) | 11.11 |
| Available mesh sizes | 100 to 5000 mesh |
| Thermal stability | Stable below 400℃ |
| Chemical property | Strong inertness |
| Toxicity | Non-toxic & odorless |
The page does not say whether these are typical values, guaranteed limits or results for one specific mesh size. It also does not state the test methods. For a purchase decision:
The product is described as stable below 400℃ and chemically inert. The key advantages listed on the product page include resistance to decomposition at temperatures up to 400℃, uniform mixing in polymer and rubber systems, and consistent behaviour that reduces viscosity changes and agglomeration.
If your process runs close to or above 400℃, this published limit tells you the grade may not suit it. If you depend on dispersion performance in a specific resin or rubber system, run your own trial. The supplier's general statements do not replace a test in your formulation.
The supplier states that this GCC has lower cost and lower oil absorption than light calcium carbonate. It also says the product can partly replace more expensive resins and pigments to reduce raw material costs. The product page also offers technical guidance on filler ratios.
Check any cost benefit through trials at your target loading level, and confirm that the mechanical and visual properties you need stay within specification.
The product offers large-scale warehousing for long-term contracts, logistics tracking and custom processing.
Prepare a short brief that covers your application, target mesh size, whiteness and moisture limits, processing temperature and expected volume. Then send it with your enquiry about the Industrial Grade Ground Calcium Carbonate GCC product, and ask for lot-specific documentation before you approve a supplier.
THE COMPANY
Welcome to Shijiazhuang Fengersheng Mining Co., Ltd. — a trusted partner with 43 years of dedication to the mineral products industry. Rooted in Lingshou County, the “Hometown of Mica in China”, we have grown from a local mica factory into a comprehensive global mineral enterprise, committed to delivering high-quality products and reliable services to customers worldwide.…
YOUR NEXT STEP
Use case, specification, quantity and delivery window: make the next conversation specific.
If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.